Hand Held Products manual 5700-X4 Laser Compatible Bar Image +12VDC Input, Pin Type D Female

Laser Output only

5700–X4

(Laser Compatible Bar Image +12VDC Input*)

Conventional laser data format is provided at the modular connector in the scanner handle.

Interface cables normally supplied with scanner model 5700–X0 are terminated with an 10 pin modular plug (P1) and a 9 pin Type D (Squeeze–to–release) connector (P2) that is compatible with all Welch Allyn terminals. See chart below.

P1 P2

10 Pin Modular Plug			9 Pin Type D Female
P1 connects to the			P2 connects to
scanner handle.			your terminal.
	Pin 1		5	1
	Pin 10		9	6
			View A–A
P1	Signal	Function		P2
9	SOS	Start of Scan		1
	Good Read	Turn on Good Read LED or Beeper
5				3
	Ground	Supply Ground
4				7
	Data	Digital Bar Code Data Output
6				2
	Trigger	Trigger Signal to Decoder
8				5
	Enable	Laser Enable
3				6
	+12VDC	Power Connection
1				9
10 VCC (Connected for AutoTrigger**)			N/C	8

*Note: Cable supports decoders which supply +12V on pin 9 ONLY.

**Note: Reference the Cable Matrix for correct AutoTrigger cable.

SCANTEAM 5700 User’s Guide 7–3