Harmony Utility

50

7.Click the Authentication tab.

8.Configure the 802.1x settings. Contact your network administrator or refer to Windows XP’s on-line Help if you need assistance configuring these settings.

Note: Depending on the network’s EAP authentication type, your network adminis- trator may need to provide you with a smart card or install a digital certificate on your computer.

9.Click the Wireless Networks tab.

10.Access the Wireless Network Properties for your network.

If your network is listed in Available networks, highlight it and click Configure.

If your network is listed in Preferred networks, highlight it and click Properties.

If your network is not listed, click Add and enter the network’s SSID.

11.Configure the network’s WEP settings.

Note: If your EAP type supports dynamic WEP keys, place a check mark next to the Data encryption (WEP enabled) and The key is provided for me automati- cally options.

12. Click OK twice to exit the network’s properties window.

Page 50
Image 50
Harmony House 802.11a manual Click the Authentication tab, Click the Wireless Networks tab