Harmony House 802.11a manual System Requirements

Introduction 10

System Requirements

To begin using a Harmony 802.11a network adapter, you must have the following minimum requirements:

•A computer that meets the following specifications:

•Windows XP, Windows 2000, Windows Millennium Edition (ME), Windows 98 Second Edition (SE), or Windows NT (Service Pack 6 or later)* installed

•CardBus Card users: PC Card expansion slot (32-bit CardBus)

•PCI Card users: PCI (Peripheral Components Interconnect) expansion slot

•At least 64 MB of memory

•A 300 MHz processor or higher

•At least one other IEEE 802.11a-compliant device

•Adapters sold in Europe require an 802.11a-compliant Access Point (peer-to-peer Ad Hoc mode is not available in Europe)

*A Windows NT laptop must have a third-party Plug-and-Play utility (such as Systemsoft’s CardWizard) to install the Harmony 802.11a CardBus Card.