Harmony Utility | 40 |
Edit the configuration parameters as necessary and click Apply to save your changes. To change the operating Channel, Send Rate, RTS/CTS, and Fragmentation settings, click the button labeled Advanced Configuration to display these parameters.
The configuration parameters are described in Chapter 4 beginning on page 27; some options may not be available in all countries (see “Overview of
Note that the Channel selection box is unavailable when the Network Mode is set to Infrastructure. When Network Mode is set to Ad Hoc, you can configure one or more Channels for the adapter to scan. If you select multiple Channels, the adapter will scan each Channel looking for an Ad Hoc network to join that uses the same SSID as the adapter.
