Heat & Glo LifeStyle SL-750TV-IPI-D 2 1 3, G. Positioning the Logs, Notches, Tabs Metal Tabs

G. Positioning the Logs

If the gas logs have been factory installed they should not need to be positioned. If the logs have been packaged separately, refer to the following instructions.

Log Set Assembly: LOGS-SL550-D

Models: SL-550TV-D

Carefully remove the logs from the packaging. CAUTION: Logs are fragile!

2 4

1 3 5

NOTCHES

TABS

METAL TABS

1

LOG #1 (SRV2044-700):Place log #1 onto the grate bars so that the notches in the bottom of the log fit onto the grate bars. Slide the log to the front tab for NG, slide to the rear tab for LP.

NOTCH

2

LOG #2 (SRV550-717):Place log #2 on the right two grate bars using the notch on the bottom of log #2. Slide the right edge of log #2 forward until it touches the grate.

26 Heat & Glo • SL-550 / 750 / 950TV-D • 2053-985 Rev. J • 4/07