Heat & Glo LifeStyle SL-750TV-IPI-D, SL-950TV-IPI-D, SL-950TV-D C. Tools and Supplies Needed

Models: SL-750TV-D SL-950TV-IPI-D SL-550TV-D SL-550TV-IPI-D SL-750TV-IPI-D SL-950TV-D

1 54
Download 54 pages 51.66 Kb
Page 8
Image 8
C. Tools and Supplies Needed

C. Tools and Supplies Needed

Before beginning the installation be sure that the following tools and building supplies are available.

Reciprocating saw

Framing material

Pliers

Hi temp caulking material

Hammer

Gloves

Phillips screwdriver

Framing square

Flat blade screwdriver

Electric drill and bits (1/4 in.)

Plumb line

Safety glasses

Level

Tape measure

Manometer

Voltmeter

Non-corrosive leak check solution

1/2 - 3/4 inch length, #6 or #8 Self-drilling screws One 1/4 inch female connection (for optional fan).

D. Inspect Appliance and Components

D. Inspect Appliance and Components WARNING

Inspect appliance and components for damage. Damaged parts may impair safe operation.

Do NOT install damaged components.

Do NOT install incomplete components.

Do NOT install substitute components.

Report suspected damaged parts to dealer.

The following B-vent components are needed for installa- tion (see Figure 2.2).

Fireplace Box

Pipe Components

Firestops

Attic Insulation Shield

Elbows

Strapping

Roof Flashing or Chase Top

Termination Cap

Storm Collar

Carefully remove the appliance and components from the packaging.

The vent system components and trim doors are shipped in separate packages.

The gas logs may be packaged separately and must be field installed.

Report to your dealer any parts damaged in shipment, particularly the condition of the glass.

VERTICAL TERMINATION CAP

STORM COLLAR Manual background

ROOF FLASHING

OR CHASE TOP

ATTIC INSULATION SHIELD Manual background

FIRESTOP SPACER

GAS B-VENT

PIPE SECTION (S)

Figure 2.2 Typical Vertical Installation

Read all of the instructions before starting the instal- lation. Follow these instructions carefully during the installation to ensure maximum safety and benefit.

Manual background WARNING

Hearth & Home Technologies disclaims any responsibility for, and the warranty will be voided by, the following actions:

Installation and use of any damaged appliance or vent system component.

Modification of the appliance or vent system.

Installation other than as instructed by Hearth & Home Technologies.

Improper positioning of the gas logs or the glass door.

Installation and/or use of any component part not approved by Hearth & Home Technologies.

Any such action may cause a fire hazard.

8

Heat & Glo • SL-550 / 750 / 950TV-D2053-985 Rev. J • 4/07

Page 8
Image 8
Heat & Glo LifeStyle SL-750TV-IPI-D, SL-950TV-IPI-D C. Tools and Supplies Needed, D. Inspect Appliance and Components