Henny Penny OFG-392 Gas Control Valve, Safety Precautions, Toavoid Injury, Property Damage, Or

	Model OFG- 390
2-9. GAS CONTROL VALVE	The gas control valve sends regulated gas to the burners when the
	controller calls for heat. The control valve can be turned on
	or off. In the on position, and the power switch on, a spark ignitor
	lights a standing pilot, and when the control calls for heat, the valve
Safety Precautions	is opened and the burners are ignited.

TOAVOID INJURY, PROPERTY DAMAGE, OR

EXPLOSION, BEFORE REPLACING GAS CONTROL

VALVE DO THE FOLLOWING:

•MOVE THE POWER SWITCH TO THE OFF POSITION.

•DISCONNECT THE MAIN CIRCUIT BREAKER AT THE WALL, OR UNPLUGTHE POWER CORD.

•TURN OFF THE MAIN GAS SUPPLYTO THE FRYER AND DISCONNECTAND CAPTHE SUPPLY LINE TO FRYER, OR POSSIBLE.

Replacement

A voltage check at the gas control valve must be taken four (4) seconds after the POWER switch is turned to the ON position.

1.Turn gas knob to the OFF position.

2.Remove cover from control valve.

3.Remove the wires from the control valve.

2-9 1003