Travelstar 5K160 (SATA) Hard Disk Drive Specification

6.3.5Preventive maintenance

None.

6.3.6Load/unload

The product supports a minimum of 600,000 normal load/unloads.

Load/unload is a functional mechanism of the hard disk drive. It is controlled by the drive micro code. Specifically, unloading of the heads is invoked by the following commands:

COMRESET Standby Standby immediate Sleep

Load/unload is also invoked as one of the idle modes of the drive.

The specified start/stop life of the product assumes that load/unload is operated normally, not in emergency mode.

6.3.6.1Emergency unload

When hard disk drive power is interrupted while the heads are still loaded the micro code cannot operate and the normal 5-volt power is unavailable to unload the heads. In this case, normal unload is not possible. The heads are unloaded by routing the back EMF of the spinning motor to the voice coil. The actuator velocity is greater than the normal case and the unload process is inherently less controllable without a normal seek current profile.

Emergency unload is intended to be invoked in rare situations. Because this operation is inherently uncontrolled, it is more mechanically stressful than a normal unload.

The drive supports a minimum of 20,000 emergency unloads.

6.3.6.2Required Power-Off Sequence

The required host system sequence for removing power from the drive is as follows: Step 1: Issue one of the following commands.

Standby

Standby immediate Sleep

Note: Do not use the Flush Cache command for the power off sequence because this command does not invoke Unload.

Step 2: Wait until the Command Complete status is returned.

In a typical case 350 ms are required for the command to finish completion; however, the host system time out value needs to be 30 seconds considering error recovery time. Refer to section 14.0, "Time-out values," on page 193.

Step 3: Terminate power to HDD.

This power-down sequence should be followed for entry into any system power-down state, system suspend state, or system hibernation state. In a robustly designed system, emergency unload is limited to rare scenarios, such as battery removal during operation.

6.3.6.3Power switch design considerations

In systems that use the Travelstar 5K160 consideration should be given to the design of the system power switch.

30/167

Page 29 Page 31
Page 30
Image 30
Hitachi HTS541640J9SA00 manual Preventive maintenance, Load/unload, Emergency unload, Required Power-Off Sequence
Page 29 Page 31

HTS541640J9SA00, HTS541616J9SA00, HTS541680J9SA00, HTS541612J9SA00, HTS541660J9SA00 specifications

The Hitachi HTS541660J9SA00, HTS541640J9SA00, HTS541616J9SA00, HTS541680J9SA00, and HTS541612J9SA00 are a series of hard disk drives that showcase Hitachi's commitment to high-performance storage solutions. These drives belong to the Travelstar series, which is designed primarily for mobile computing applications, such as laptops and external storage devices. Their compact design and reliable performance make them suitable for users seeking efficient storage in portable settings.

One of the primary features of these drives is their SATA interface, which allows for fast data transfer rates, thereby enhancing overall system performance. The SATA II interface provides a maximum transfer rate of up to 3.0 Gbps, ensuring that these drives can keep up with the demands of modern computing.

The storage capacity of these models varies, with options such as 160GB, 250GB, and 320GB, catering to diverse user needs for both personal and professional use. The HTS541660J9SA00 provides a generous 160GB capacity, while the HTS541680J9SA00 offers up to 320GB, making them suitable for users who require significant storage space for media files, applications, and documents.

In terms of performance, these hard drives boast a rotational speed of 5400 RPM, striking an optimal balance between speed and energy efficiency. This speed ensures relatively quick access times while consuming less power compared to faster 7200 RPM drives, making them ideal for battery-powered devices.

Another significant characteristic of these drives is the use of Hitachi’s Advanced Format technology. This technology increases the physical sector size of the drives to 4KB, enhancing error correction and overall data integrity. This larger sector size allows for greater data efficiency, significantly reducing the overhead associated with data storage.

Furthermore, these drives are designed with Shock Protection technology, which helps to safeguard the drive's internal components from physical shocks caused by accidental drops or bumps. This feature is especially important for mobile storage solutions, where portability can lead to unintentional impacts.

In conclusion, the Hitachi HTS541660J9SA00, HTS541640J9SA00, HTS541616J9SA00, HTS541680J9SA00, and HTS541612J9SA00 hard disk drives are exemplary choices for anyone seeking reliable, efficient, and portable storage solutions. With their combination of adequate capacity, enhanced data management technologies, and robust design, these drives effectively meet the demands of today’s mobile computing needs.
Top Page Image Contents