Hitachi HTS541660J9SA00 Safety, Packaging, Substance restriction requirements, IEC compliance

Travelstar 5K160 (SATA) Hard Disk Drive Specification

6.9Safety

6.9.1UL and CSA approval

All models of the Travelstar 5K160 are qualified per UL60950-1:2003

6.9.2IEC compliance

All models of the Travelstar 5K160 comply with IEC 60950-1:2001.

6.9.3German Safety Mark

All models of the Travelstar 5K160 are approved by TUV on Test Requirement: EN 60950-1:2001, but the GS mark has not been obtained.

6.9.4Flammability

The printed circuit boards used in this product are made of material with a UL recognized flammability rating of V-1 or better. The flammability rating is marked or etched on the board. All other parts not considered electrical components are made of material with a UL recognized flammability rating of V-1 or better except minor mechanical parts.

6.9.5Secondary circuit protection

This product utilizes printed circuit wiring that must be protected against the possibility of sustained combustion due to circuit or component failures as defined in C-B 2-4700-034 (Protection Against Combustion). Adequate secondary over current protection is the responsibility of the using system.

The user must protect the drive from its electrical short circuit problem. A 10 amp limit is required for safety purpose.

6.10 Packaging

Drives are packed in ESD protective bags and shipped in appropriate containers.

6.11Substance restriction requirements

The product complies with the Directive 2002/95/EC of the European Parliament on the restrictions of the use of the certain hazardous substances in electrical and electronic equipment (RoHS).

38/167