| Travelstar 5K160 (SATA) Hard Disk Drive Specification | |
| 02h | SET MAX LOCK |
| 03h | SET MAX UNLOCK |
| 04h | SET MAX FREEZE LOCK |
| When the Set Max ADDRESS command is executed, this register is | |
B | ignored. |
|
Option bit for selection whether nonvolatile or volatile. B=0 is volatile | ||
| condition. When B=1, MAX LBA/CYL which is set by Set Max | |
| ADDRESS command is preserved by POR. When B=0, MAX LBA/CYL | |
LBA Low | which is set by Set Max ADDRESS command will be lost by POR. | |
in LBA mode, this register contains LBA bits 0 - 7 which is to be | ||
| input.(L=1) | |
LBA High/Mid | In CHS mode, this register is ignored. (L=0) | |
In LBA mode, this register contains LBA bits 8 - 15 (Mid), 16 - 23 (High) | ||
| which is to be set. (L=1) | |
| In CHS mode, this register contains max cylinder number which is to be | |
H | set. (L=0) | |
In LBA mode, this register contains LBA bits 24 - 27 which is to be | ||
| input.(L=1) | |
L | In CHS mode, this register is ignored. (L=0) | |
LBA mode.Indicates the addressing mode.L=0 specifies CHS mode and | ||
| L=1 does LBA addressing mode. | |
Input Parameters From The Device |
| |
LBA Low | In LBA mode, this register contains Adjusted max LBA bits 0 - 7.(L=1) | |
LBA High/Mid | In CHS mode, this register contains max LBA Low(= 63). (L=0) | |
In LBA mode, this register contains Adjusted max LBA bits 8 - 15 (Mid), | ||
| 16 - 23 (High). (L=1) | |
| In CHS mode, this register contains max cylinder number which is set. | |
H | (L=0) |
|
In LBA mode, this register contains Adjusted max LBA bits 24 - 27. (L=1) | ||
| In CHS mode, this register contains max head number(= 15).(L=0) | |
128/167
