Exposed moving parts can
cause injury.
Do not operate the
outboard motor without
the engine cover.
Use extreme care when
installing the engine
cover.
29
OPERATION
TAKING CARE OF
UNEXPECTED PROBLEMS,
Pull the emergency starter rope
slowly until resistance is felt, then
pull briskly.
Keep awayf rom moving parts
while pulling the rope.
If necessary, rewind the rope and
pull again.If the enginedoes not
start after several attempts, refer to
p. .
If the choke was used to start the
engine,return the knob to the
normal operating position as the
enginewarms up.
Leave the recoil starter assembly
off, but install the engine cover
(p. ).
If it was necessary to remove the
emergencystop switch lanyard
from you to perform the
emergencystarting procedure, be
sure the lanyard is attached
securely to operator before
operatingthe outboard motor.
Have your closestauthorized
Honda marinedealer check your
recoil starter system and correct
the problem,so you can use the
recoil starter.
The recoilstarter assembly should
be reinstalled after the recoil
starteris working again. Install the
recoil starter assembly with the
enginestopped.
6.
7.
8.
9.5.
58
43
11/03/03 17:08:52 31ZW6620_030