2.5 lbf·ft (3.4 N·m , 0.35 kgf·m)
2.5 lbf·ft (3.4 N·m , 0.35 kgf·m)
0.05 US qt (0.05 L)
45Gear Case Oil Change
SERVICING YOUR OUTBOARD MOTOR
GEAROIL
LEVELSCREW
GEAROI L DRAIN/
FILLS CREW GEAROIL BOTTLE
Improper disposal of gear case oil
can be harmful to the environment.
If you change your own oil, please
dispose of the used oil properly.
Put it in a sealed container,and
take it to a recycling center. Do
not discard it in a trash bin, dump
it on the ground, or pour it down
the drain.
Allow theused oil to drain
completely, then install an oil
pump adapterin the oil drain hole.
OIL DRAIN PLUG TORQUE:
OIL LEVEL PLUG TORQUE:
GEAR OIL CAPACITY:
Change the gear case oil with the
enginestopped and the outboard
motor in the vertical position. If water or contaminated (milky-
colored) oil flows out the drain
hole when thescrew is removed,
have theoutboard motor checked
by an authorizedHonda Marine
dealer.
Add oil throughthe oil drain hole
until itf lows out the oil level hole,
and then install the oil level screw.
Removethe pump adapter and
install the oil drain/fill screw.
Outboard motorSAE 90 hypoid
gear oil API Service category (GL-
4)
Avoid losingmore than 1 f l oz (30
cm ) while reinstalling the drain/
fill screw.Placea suitable container below
the oil drain hole to catch the used
oil, then remove the oil level screw
and oil drain/fill screw.
3.
1.
2.
3
11/03/03 17:12:16 31ZW6620_046