Getting Started
Relay Output
Getting Started
The controller units are customized to the purchaser’s specifications but they can be further programmed using the following menu options.
Initial Startup
Make sure that all wiring has been completed according to specifications in the wiring details before powering up the unit. When all is secure, remove the SHDN jumper to
Datalogger (SDcard)
The DLC (Data Logger Card) option for the controller collects data and stores it on a digital Flash memory card (SDCard). In the event that the card memory becomes full:
•Information logging is stopped
•No SDcard flag is displayed
•The SDcard LED blinks
See the Acquisition section for more details on starting and stopping the datalogging function.
CAUTION
Always deactivate datalogging function before removing the SDcard. Never remove the card when its LED is on.
301C User Manual | 19 | |
7/10 | Honeywell |
|
