System Programming
Config Menu
Scroll through the main Config menu screens using the left (previous) or right (next) keypad arrows.
The third main screen in the Config menu allows the relay configuration to be set, the AP broadcast mode and to select from four separate manufacturers for the given controller.
6. Config
Relay Configuration
AP Brdcst: auto
Honeywell
When Relay Configuration is selected, two further options to configure the relays are available: The first screen, Failsafe, appears allowing the failsafe to be activated for all relays using the Enter keypad button. This function is used in case of a power failure: if power is cut, the relay will activate the connected device (ex. a light) to signal the problem.
Relay Configuration
All relays Inactive
Scrolling to the right displays the “Silence” screen that enables or disables the silence option for each relay, using the Enter keypad button.
Relay Configuration
|
|
| ||
1 |
| 2 | 3 | 4 |
| ||||
dis |
| ena | dis | dis |
301C User Manual | 59 | |
7/10 | Honeywell |
|
