Honeywell 301c user manual Dp Bm

System Programming

Wireless Network Menu

The following table provides the list of data displayed for each node. Use the right or left keypad arrows to navigate the possible nodes, then use the up or down keypad arrows to navigate the entire list of data for the selected node.

#		Title	Value	Description
	4.	Link Quality	1	Percentage of signal strength (0-100%) for
				a node, relative to parent signal quality
5.	Log Mod	Log	Indicates whether the node is in debug
				mode
6.	Net Addr	0009	Displays the node’s (hexadecimal) network
				address (seen in 1st screen)
7.	SWU slot	1	Displays the SWU slot used to transmit
				beacon
8.	# of Parents	1	Displays the number of current parents for
				a given node, from 0 - 3.
9.	DP Id	0	Displays the ID associated to the default
				parent
10.	DP Net Addr	0	Displays the default parent network
				address
11.	DP LQI	2	Displays the link quality with the default
				parent:
				0 = no useful link/1 = weak link/2 = strong
				link
12.	DP Retries	(?)	Displays the number of default parent
				retries
13.	DP BM	0	Displays the number of parent beacons
				missed over last beacon period
14.	DP LC	256	Displays the time since lasct
				communication to default parent (in
				milliseconds)
15.	AP1 ID	(?)	Displays the ID associated to the
				alternative parent 1
16.	AP1 Net Addr	(?)	Displays the alternative parent 1 network
				address
17.	AP1 LQI	16	Displays the link quality with alternative
				parent 1:
				0 = no useful link/1 = weak link/2 = strong
				link
84			301C User Manual		M-510324
				Honeywell	7/10