Honeywell 301c user manual COM Menu

System Programming

Tx Info Menu

COM Menu

This screen displays the selected communication protocol for device addresses from 1 to 96. Each transmitter’s protocol is defined by the controller (see Network Auto-configuration section)

.

1. Tx Info 001

-COM- Mdbs RTU 8D 1S EP 9600 bauds

If a transmitter is compatible with several different protocols, it can be modified using to one of the following options:

•Vulbus

•Mdbs ASCII 7D 2S NP 9600 bauds

•Mdbs RTU 8D 2S NP 9600 bauds

•Mdbs RTU 8D 1S NP 9600 bauds

•Mdbs RTU 8D 1S OP 9600 bauds

When a transmitter is configured with the Modbus communication protocol, the transmitters automatically sends the programmable parameters to the controller.

Note: Vulbus transmitter parameters must be programmed manually.

M-510324	301C User Manual	29
7/10	Honeywell