
System Programming
Tests Menu
Normal Mode
This is the system’s normal (default) operation mode. When the system is in normal mode, some values can be changed without interrupting services. When a value has been changed in any of the menu fields, the change will take effect upon returning to the main menu screen.
Single Tx Mode
This mode allows transmitters to be analyzed one at a time. The controller polls only the selected device, which subsequently has its information updated. This mode does not interfere with Event Evaluation functions.
Debug Mode
This mode allows complete system operation to be evaluated and tested without affecting operations (outside of debug mode). Events are evaluated and displayed as necessary but no action is triggered.
301C User Manual | 69 | |
7/10 | Honeywell |
|