PRIMUSr 880 Digital Weather Radar System

PUSH BUTTON CONTROLS

The following remotely mounted push buttons control the EGPWS display:

DINHIB (Inhibit) Button -- When active, the push on/push off INHIB button prevents terrain data from being displayed on the radar indicator. When the button is active, the INHIB annunciator lights.

DON (Terrain) Button -- When active, the push on/push off ON button displays terrain on the radar indicator.

ANNUNCIATORS

The following annunciators are displayed on the radar indicator to indicate EGPWS operation:

DFAIL -- The FAIL annunciator indicates that the EGPWS has failed.

DINHIB -- The INHIB annunciator indicates that the INHIB push button has been pushed and is active. When INHIB is annunciated, EGPWS is not displayed on the radar indicator, and the aural annunciators do not sound.

NOTE: The FAIL and INHIB annunciators are often incorporated into the INHIB push button.

DTERR (Terrain) -- The TERR annunciator indicates that the annunciator lamp power is on. It does not indicate the operational status of the system.

DON -- The ON annunciator indicates that the radar indicator is displaying terrain. This ON push button lamp is lit if the ON push button has been pushed and is active, or if an actual Terrain Alert is indicated by the EGPWS system and the terrain is automatically displayed.

NOTE: The TERR and ON annunciators are often incorporated into the ON push button.

Some installation may not contain all of these controls and annunciators, or they may have different names. Most EGPWS installations have additional controls and/or annunciators (i.e., TEST). Refer to the appropriate publication for details.

 

 

 

Enhanced Ground-Proximity Warning System (EGPWS)

A28-1146-102-03

B-2

REV 3

Use or disclosure of the information on this page is subject to the restrictions on the title page of this document.

Page 151
Image 151
Honeywell 880 manual Push Button Controls, Annunciators