PRIMUSr 880 Digital Weather Radar System

2 TILT

The TILT switch is a rotary control that is used to select the tilt angle of antenna beam with relation to the horizon. CW rotation tilts beam upward 0_ to 15_; ccw rotation tilts beam downward 0_ to - 15_. The range between +5_ and - 5_ is expanded for ease of setting. A digital readout of the antenna tilt angle is displayed on the EFIS.

DPULL ACT (Altitude Compensated Tilt) Function - When the TILT control knob is pulled out, the system engages the ACT (option). In ACT , the antenna tilt is automatically adjusted with regard to the selected range and barometric altitude. The antenna tilt automatically readjusts with changes in altitude and/or selected

range. In ACT, the tilt control can fine tune the tilt setting by ±2°.

ACT is annunciated with an A following the digital tilt readout. The digital tilt readout always shows the commanded tilt of the antenna regardless of the tilt command source (ACT command or manual tilt

command).

WARNINGS

1.TO AVOID FLYING UNDER OR OVER STORMS, FREQUENTLY SELECT MANUAL TILT TO SCAN BOTH ABOVE AND BELOW YOUR FLIGHT LEVEL.

2.ALWAYS USE MANUAL TILT FOR WEATHER ANALYSIS.

3 SECT (Scan Sector)

The SECT switch is an alternate- action button that is used to select either the normal 12 looks/minute 120_ scan or the faster update 24 looks/minute 60_ sector scan.

4 TGT (Target)

The TGT switch is an alternate- action, button that enables and disables the radar target alert feature. Target alert is selectable in all but the 300 mile range. When selected, target alert monitors beyond the selected range and 7.5_ on each side of the aircraft heading. If a return with certain characteristics is detected in the monitored area, the target alert changes from the green armed condition to the yellow TGT warning condition. This annunciation advises the pilot that a potentially hazardous target lies directly in front and outside of the selected range. When this warning is received, the pilot should select longer ranges to view the questionable target. Note that target alert is inactive within the selected range.

Operating Controls

A28- 1146- 102- 00

3-16

 

Page 31
Image 31
Honeywell 880 manual Tilt, Sect Scan Sector