PRIMUSr 880 Digital Weather Radar System
Tables 5- 1 and 5- 2 give the approximate tilt settings at which ground targets begin to be displayed on the image periphery for 12- and 18- inch radiators. The range at which ground targets can be observed is affected by the curvature of the earth, the distance from the aircraft to the horizon, and altitude above the ground. As the tilt control is rotated downward, ground targets first appear on the display at less than maximum range.
NOTE: Operation with a 24- inch radiator is similar.
To find the ideal tilt angle after the aircraft is airborne, adjust the TILT control so that groundclutter does not interfere with viewing of weather targets. Usually, this can be done by tilting the antenna downward in 1_ increments until ground targets begin to appear at the display periphery. Ground returns can be distinguished from strong storm cells by watching for closer ground targets with each small downward increment of tilt. The more the downward tilt, the closer the ground targets that are displayed.
When ground targets are displayed, move the tilt angle upward in 1_ increments until the ground targets begin to disappear. Proper tilt adjustment is a pilot judgment, but typically the best tilt angle lies where ground targets are barely visible or just off the radar image.
Tables 5- 1 and 5- 2 give the approximate tilt settings required for different altitudes and ranges. If the altitude changes or a different range is selected, adjust the tilt control as required to minimize ground returns.
A28- 1146- 102- 00 | Radar Facts |
|
