PRIMUSr 880 Digital Weather Radar System
WC- 884 WEATHER RADAR CONTROLLER OPERATION
The controls and display features of the WC- 884 Weather Radar Controller are indexed and identified in figure 3- 5. Brightness levels for all legend and controls on the indicator are controlled by the dimming bus for the aircraft panel.
Whenever single or dual radar controllers are used, the radar data is displayed on the EFIS, MFD, or NAV display.
1 | 2 | 3 | 4 | 5 |
BRT
TGT STAB RCT
TRB
| PULL VAR | TEST | WX | 50 | 100 | PULL ACT + | |||
|
|
| STBY | GMAP | 25 | 200 |
|
| |
|
|
| OFF |
| 10 | 300 | 0 |
| |
MIN |
| MAX | MODE SLV |
| FPLN | - | |||
GAIN | RANGE | TILT | |||||||
|
|
| |||||||
10 |
| 9 |
| 8 | 7 |
| 6 |
|
AD- 46698- R2@
WC- 884 Weather Radar Controller
Figure 3- 5
1 BRT (Brightness)
The BRT switch is a rotary control that is used to set the radar (raster) brightness on the EFIS display.
2 TGT (Target Alert)
The TGT switch is an alternate- action, button that enables and disables the radar target alert feature. Target alert is selectable in all but the 300- mile range. When selected, target alert monitors beyond the selected range and 7.5_ on each side of the aircraft heading. If a return with certain characteristics is detected in the monitored area, the target alert changes from the green armed condition to the amber TGT warning condition. (Refer to the target alert characteristics in table 3- 5 for a target description.) The amber TGT alerts the pilot as to potentially hazardous targets directly in front and outside of the selected range. When the alert is given, the pilot should select longer ranges to view the questionable target. Target alert is inactive within the selected range.
Operating Controls | A28- 1146- 102- 00 |
|