![](/images/backgrounds/170124/170124-136120x1.png)
USB Hard Disk Drive Preparation
Preparing the
Note Preparing a
1.Connect the
2.Turn on your computer. The Add New Hardware wizard screen appears.
3.Install the device driver for the USB backup device following the instructions provided with your USB hard disk drive.
4.If the
5.Run the FDISK utility by clicking Start then RUN. Type fdisk and click OK.
6.When the
8.Choose the appropriate letter corresponding to the
10.In the Create DOS Partition or Logical DOS Drive menu, choose 1. Create Primary DOS Partition. Then type Y to use all available space, and then press ENTER. Press ESC to exit the screen after the
11.Restart your computer and verify the newly created drive is in My Computer.
12.
13.In the Format Screen, select Full as the Format type and press Start.
14.After formatting is complete, connect the
120