![](/images/backgrounds/170124/170124-13676x1.png)
Configuration
Figure2.Highlight the Sched field and press . A schedule screen appears. Set the schedule as described earlier (see Scheduling an Alarm Output on page 59).
3.Highlight the Alarm Out field and select either Beep or the alarm output terminal that you want to associate with the
4.Highlight the Dwell Time field and set the length of time you want the output activated. You can select from 1 to 300 seconds.
5.Save your changes by highlighting OK and pressing . Select Cancel to exit the screen without saving the changes.
Text-In Event Action (Notify) Setup Screen
The DVR can be set to notify the remote site in the case of
Highlight . The
1.Highlight the Sched field and press . A schedule screen appears. Set the schedule as described earlier see Scheduling an Alarm Output on page 59).
76