Configuration

Figure 3-49 Main Monitoring Setup ScreenOptionFunction

Sequence Dwell Highlight the field beside Sequence Dwell Time and press

Time. You can adjust the sequence dwell time from 3 to 60 seconds.

Note The DVR does not sequence the camera that are experiencing video loss.

Event Monitoring Highlight the field beside Event Monitoring and press to toggle between On and Off.

When set to On, video from the lowest numbered camera among those connected with the event-detected sensor displays full-screen on the main monitor for the preset dwell time.

Event Monitoring Highlight the field beside Event Monitoring Dwell Time and

Dwell Time press . You can adjust the event monitoring dwell time from 3 to 60 seconds.

Setting Up the DVR Network Connections

In the Network Setup screen you can set up the DVR for LAN and modem connections.

You can access the Network Setup screen in two ways:

•From the Main menu, select Network, and then Network Setup.

OR

1.From the Main menu, select Quick Setup and press . The Quick Setup screen appears.

2.Select the field beside Quick Setup, and press to toggle On. More fields become active.

3.Highlight Network Setup and press . The Network Setup screen appears.

82