Honeywell HRSD4 Setting the DVR for Auto Deletion, Off, Note, Note, High, Note, Panic, Speed, Panic, Option, Quality, Function, Duration, No Limit, Standard, Auto Deletion

Configuration

Table 3-8 Record Mode Setup Screen Options

Option	Function
On Disk Full Alarm Out	Highlight the field beside On Disk Full Alarm Out and
	press	to toggle between On and Off.
On Panic Recording	Press Panic on the front panel to open the Panic
Speed	Recording mode. In the Record Mode Setup screen,
	you can program the recording speed, quality, and
	duration for when the DVR is in the Panic Recording
	mode.
	Set On Panic Recording Speed from 0.5 to 30 ips (25
	ips PAL).
On Panic Recording	Set On Panic Recording Quality from Very High,
Quality	High, Standard, and Low.
On Panic Recording	Set On Panic Recording Duration from 5 to 60
Duration	minutes. The panic recording stops automatically
	according to the preset duration as long as the Panic

button has not been pressed to stop the panic recording. Select No Limit if you want to stop panic recording manually.

Note When the DVR is in the Panic Recording mode, it ignores the time-lapse or event recording settings and follows the panic recording settings.

Note The maximum panic recording speed is 30 images per second (25 ips for PAL) when the resolution is set to Standard. However, when set to High, the recording speed decreases to 15 images per second (12.5 ips for PAL).

Note When the DVR is in the Panic Recording mode, the RECORD LED on the front panel flickers and the displays on each camera screen.

Setting the DVR for Auto Deletion

1.Highlight the first field beside Auto Deletion.

Document 800-00919 Rev F	63
02/08