Honeywell HRSD4 Setting Up the Callback Center to Contact a Pager, Note, Network, Callback Center, Code Translation, Table 3-10Callback Center Pager Codes

Configuration

Note	Authentication should be turned On and the ID and Password
	should be entered when using an SMTP server requiring user
	authentication.

Setting Up the Callback Center to Contact a Pager

You can set the DVR to dial a pager and leave a four- or five-digit message when an event occurs. This message is a code, as shown in Table 3-10. The first three digits of the message are the site ID number. The last digits are the type of event.

Table 3-10 Callback Center Pager Codes

Code Translation

1Alarm In

2Text-In

3Motion Detection

4Video Loss

10Check Recording

11Storage

13S.M.A.R.T.

18System

For example, 0754 means that Site 75 has lost video.

From the Main menu, select Network, then Callback Center, and then press . The Callback Center (Modem) setup screen appears because you selected Modem as the network connection type in the Network Setup screen (see Setting the Connection Type on page 83).

Document 800-00919 Rev F	93
02/08