![](/images/backgrounds/170124/170124-13674x1.png)
Configuration
3.Highlight the Notify field and press to toggle between On and Off. When set to On, the DVR notifies the remote site when certain events occur based on a defined schedule.
4.Save your changes by highlighting OK and pressing . Select Cancel to exit the screen without saving the changes.
Note For the Notify action to work, the DVR should be registered in the
RASplus (Remote Administration System).
When the DVR detects motion, the displays on each associated camera.
Text-In Event Action (Record) Setup Screen
The DVR can be set to react to text input from the
•a schedule
•an associated camera
•a recording speed
•a video quality
•a dwell time
Note These procedures are the same for both Mode 1 and Mode 2.
Note You can only set
Highlight . The
74