Honeywell HRSD4 Video Loss Event Action (Notify) Setup Screen, Setting Up the HRSD4 Displays, Off, Off, Note, Cancel, Notify, Cancel, Video Loss Event Action (Notify)

Configuration

3.Save your changes by highlighting OK and pressing . Select Cancel to exit the screen without saving the changes.

Video Loss Event Action (Notify) Setup Screen

The DVR can be set to notify the remote site in the case of video loss.

1.Highlight Video Loss Event Action (Notify) in the Event Action menu and press . The Video Loss Event Action (Notify) setup screen appears.

Figure 3-47 Video Loss Event Action (Notify) Setup Screen

2.Highlight the Sched field and press . A schedule screen appears. Set the schedule as described earlier see Scheduling an Alarm Output on page 59).

3.Highlight the Notify field and press to toggle between On and Off. When it is On, the DVR notifies the remote site when the DVR loses video input from a camera during a scheduled period of time.

4.Save your changes by highlighting OK and pressing . Select Cancel to exit the screen without saving the changes.

Note For the Notify action to work, the DVR should be registered in the

RASplus (Remote Administration System).

When the DVR detects video loss, displays on each associated camera.

Setting Up the HRSD4 Displays

The DVR can be set up to display Date, Time, Title, and Status on screen. Each feature can be turned On or Off. You can also adjust the margins.

Document 800-00919 Rev F	79
02/08