![](/images/backgrounds/170124/170124-13636x1.png)
Configuration
Setting Up Your DVR Using the Quick Setup ScreenFigureThe Quick Setup screen allows you to set up the most commonly used features of your
DVR. Use the arrows to move through the options. Press to make your selections.
Table | Quick Setup Screen Options | ||||
Option |
| Action | |||
|
|
|
|
| |
Quick Setup On/Off | Highlight the field beside Quick Setup and press |
|
|
| |
|
|
| |||
|
| ||||
|
| to toggle between On and Off. If you select Off, use the | |||
|
| Normal Setup screen to change the settings. | |||
|
|
|
|
|
|
Recording |
| Highlight the first field beside Recording | |||
Speed/Quality |
| Speed/Quality, and select recording speeds from as | |||
|
| few as 0.5 ips (images per second) to as many as 30 | |||
|
| ips (25 ips for PAL). |
Highlight the second field beside Recording
Speed/Quality, and select from Very High, High,Standard, and Low.Note The DVR has a maximum recording speed of 30 ips per camera. However, the recording speed may not be achieved when averaged over all cameras.
Audio | Highlight the field beside Audio Recording and select |
| either On or Off. When it is set to On, Camera 1 is |
| automatically associated with the audio input. |
Note It is the user's responsibility to determine if local laws and regulations permit recording audio.
Sequence Dwell Time Highlight the field beside Sequence Dwell Time and select from 3 to 60 seconds for the camera sequence dwell time.
36