Honeywell HRSD4 Settings for Generic Text, EPSON-POS,and VP Filter, Use, Off, Off, Note, Note, Note, Text-In, VP Filter, EPSON-POS, VP Filter, •EPSON-POS, •VP Filter

Configuration

Note If networking is configured by the external modem, the text-in cannot be set up. Set the DVR for LAN connections (see Setting the Connection Type on page 83) and set up text-in for RS-232C port (see Communicating with External Devices Using the RS-232C Port on page 60).

Note Text-in data can not be recorded during clip copy.

2.Highlight the field beside Use Text-Inand press to toggle between On and Off.

3.Highlight the box next to Multi-devices on 1 channel and press to toggle between On and Off. When turned On, the DVR supports up to 4 text inputs.

If you turn On Multi-devices on 1 channel, then you can select only VP Filter from the Product Type list.

If you turn Off Multi-devices on 1 channel, then you can select Generic Text, EPSON-POS, or VP Filter from the Product Type list.

4.Highlight the field beside Product Type, and press .

5.Select your device from the list. Your choices are:

•Generic Text

•EPSON-POS

•VP Filter

Settings for Generic Text, EPSON-POS, and VP Filter

Note VP Filter, Generic Text, and EPSON-POS devices are currently supported.

The following description is for VP Filter, Generic Text, and EPSON-POS devices. The screen changes for different types of text input devices, and there are different parameter boxes for you to enter information.

Document 800-00919 Rev F	55
02/08