Configuration

Figure 3-8 Virtual Keyboard

2.Use the arrows on the front of the DVR to highlight the first character you want in

the Site Title and press . That character appears in the title bar and the cursor moves to the next position. You can use up to 20 characters, including spaces, in your title.

Press to toggle between the upper and lower case keyboards.

Press to backspace.

Press to delete entered characters.

3.Highlight Close and press the button once you have entered your title.

Changing the Unit ID

The Unit ID number is used to identify the unit when it is networked with other DVRs. You cannot use the same number for two or more DVRs that are within the same network.

1.Highlight the field beside Unit ID in the System Information Change screen, then

press .

2.Change the number by highlighting it and using the Up and Down arrows to increase and decrease the number.

Note When the Unit ID is set to 0, the infrared remote control can control that DVR without any additional operations.

When the Unit ID is set from 1 to 4, you must press ID on the remote control (1 to 4) to control that DVR.

When the Unit ID is set to 5 or higher, the infrared remote control can not control any DVRs.

Changing the Language Setting

1.Highlight the field beside Language in the System Information Change Screen

and press . A drop-down menu appears listing the available languages.

2.Highlight the desired language and press .

Document 800-00919 Rev F

39

02/08