Honeywell HRSD4 Registering the Network for DVRNS Service, Odd, None, Even, Note, 7 bit, 8 bit, Parity, Cancel, 115,200, Data Bit, Stop Bit, Baud Rate, 2 Stop Bits

Configuration

Figure 3-55 Modem Setup Screen

1.Highlight the field beside Baud Rate and press . A list appears of baud rates ranging from 300 to 115,200.

2.Highlight the field beside Data Bit and press to choose between 7 bit and 8 bit formats.

3.Highlight the field beside Stop Bit and press to choose between 1 and 2 Stop Bits.

4.Highlight the field beside Parity and press . A drop-down list appears. You can select from None, Odd, or Even parity.

5.Save your changes by highlighting OK and pressing . Select Cancel to exit the screen without saving the changes.

Note If the RS-232C port is in use for Remote Control, Text-In, or PTZ, networking cannot be configured for a modem.

Registering the Network for DVRNS Service

You can register the DVR using the DVRNS (DVR Name Service) server.

Document 800-00919 Rev F	89
02/08