Configuration

5.Highlight the field beside DVR Name and press to give a name to the DVR you want to register on the DVRNS server. A virtual keyboard appears with which you can enter the DVR name.

6.Select Check to check if you can use the name you have entered.

Note You must check the DVR name you enter by selecting Check before you can save the DVRNS changes.

Note If you try to not enter or name, or if you try to enter a name already registered on the DVRNS server, an error message displays.

7.Highlight OK and press to register the DVR on the DVRNS server. If you have proper DVRNS settings, then the DVRNS server help desk information displays in the field beside Help Desk.

Caution If you want to use the same DVR name registered on the DVRNS server after you have initialized the system using the factory reset, you must contact the DVRNS server manager. Please record and keep the help desk information before factory reset.

Caution The DVRNS registration is limited to one DVRNS server. The DVR cannot be registered to multiple DVRNS servers. Please contact your network administrator when you want to register the DVR to another DVRNS server.

Setting up the Callback Center Feature

You can set up the DVR to either contact your computer or your pager when an event occurs. If you have the LAN set up, then you can set the DVR to contact a computer running RASplus (Remote Administration System). If you have a modem connected to the DVR, then you can set up the DVR to dial a pager with a numeric message when an event occurs.

Document 800-00919 Rev F

91

02/08