Configuration

Figure 3-40 Motion Detector Event Action (Alarm Out) Setup Screen

2.Highlight the Sched field and press . A schedule screen appears. Set the schedule as described earlier see Scheduling an Alarm Output on page 59).

3.Highlight the Alarm Out field and select either Beep or the alarm output terminal that you want to associate with the motion event.

4.Highlight the Dwell Time field and set the length of time for which you want the output activated.

5.Save your changes by highlighting OK and pressing . Select Cancel to exit the screen without saving the changes.

Motion Detector Event Action (Notify) Setup Screen

The DVR can be set to notify the remote site when certain motion events are activated.

1.Highlight Motion Detector Event Action (Notify) in the Event Action menu and

press . The Motion Detector Event Action (Notify) setup screen appears.

Figure 3-41 Motion Detector Event Action (Notify) Setup Screen

2.Highlight the Sched field and press . A schedule screen appears. Set the schedule as described earlier (see Scheduling an Alarm Output on page 59).

Document 800-00919 Rev F

73

02/08