Configuration

Using the Network Setup Screen for Network Connection

Figure 3-50 Network Setup Screen

Setting the Connection Type

Select the field beside Connection. Press to toggle between LAN and Modem.

Note If the RS-232C port is being used for another device, you can not use it for network setup. You must reset this connection. See Communicating with External Devices Using the RS-232C Port on page 60.

Changing Network Passwords

Note These network passwords are case sensitive. The factory default

password for both the Network Administrator and the Network User is 12345678.

Changing the Admin Password

1.Highlight the field beside Admin Password and press . A virtual keyboard appears.

2.Enter the current password.

Document 800-00919 Rev F

83

02/08