Configuration

2.Highlight the Sched field and press . A schedule screen appears. Set the schedule as described earlier see Scheduling an Alarm Output on page 59).

3.Highlight the Notify field and press to toggle between On and Off. When set to On, the DVR notifies the remote site when certain events occur based on a defined schedule.

4.Save your changes by highlighting OK and pressing . Select Cancel to exit the screen without saving the changes.

Note For the Notify action to work, the DVR should be registered in the

RASplus (Remote Administration System). Refer to the RASplus

User’s Manual.

When the DVR detects alarm input, the displays on each associated camera.

Motion Detector Event Action (Record) Setup Screen

The DVR can be set to react to motion detection differently. Each camera can be assigned:

•a schedule

•an associated camera

•a recording speed

•a video quality

•a dwell time

Highlight Motion Detector Event Action (Record) in the Event Action menu and press . The Motion Detector Action (Record) setup screen appears.

Figure 3-39 Motion Detector Event Action (Record) Setup Screen

1.Highlight the Sched field and press . A schedule screen appears. Set the schedule as described earlier (see Scheduling an Alarm Output on page 59).

Document 800-00919 Rev F

71

02/08