Configuration

Note The Admin and User passwords can have up to eight digits using the camera buttons. The default Admin password is 4321.

Caution Write down the new password and save it in a secure place. If you forget the password, you must reset the DVR using the Factory Reset button. If you reset the DVR, you will lose all of your data settings.

5.Save your changes by highlighting OK and pressing . Select Cancel to exit the screen without saving the changes.

Locking the Buttons on the Front Panel or Remote Control

Highlight Key Lock On and press . Once the buttons are locked, you can press any button on the front panel or remote control to display a password screen with which you can unlock the buttons.

Unlocking the Buttons on the Front Panel or Remote Control

Press any button on the front panel or remote control to display a password screen. Enter the correct password to unlock the keys. The Key Lock password is 4321. You can also use the Administrator password to unlock the keys.

Using the Config Screen

Use the Config menu to perform functions such as:

•switching between Quick Setup and Normal Setup

•copying/backing up video clips

•loading or saving a setup

•loading default setup

•clearing all data

96