Configuration

3.Highlight the field beside DNS Server and press to enter the IP address of the DNS server. If you set up the DNS Server, you can use the domain name of the DVRNS server instead of the IP address during the DVRNS Server setup. See Registering the Network for DVRNS Service on page 89 for details.

4.Highlight Port Number Setup… and press . The Port Number Setup screen appears.

Figure 3-52 Port Number Setup Screen

Note You need to get the appropriate Port Number for each RASplus-related program (Admin, Watch, Search, and Callback) from your network administrator.

5.Change the number by highlighting it and using the Up and Down arrows to increase or decrease the number.

The factory default Port settings are:

Remote Admin:

8200

Remote Watch:

8016

Remote Search:

10019

Remote Callback:

8201

Note The system restarts automatically after changing the port settings.

Note Do NOT use the same port number for two different programs, otherwise, the DVR cannot be connected with a PC running RASplus.

86