Configuration

From the Main menu, select RS232 and press . The RS232 Setup screen appears.

Figure 3-31 RS232 Setup Screen

1.Highlight the field for the settings you wish to change. Select the correct Baud Rate, Parity, Data Bit, and Stop Bit for the device you are connecting to the DVR.

2.Highlight the field next to Usage, and press to toggle through the list: Remote Control, External Modem, Text-In, or PTZ.

Note Selecting External Modem in the RS232 field only defines the RS-232C port as being used for the external modem connections. See Modem Setup Screen on page 89 for how to set up an external modem.

Note Selecting PTZ in the RS232 field only defines the RS-232C port as being used for the PTZ camera connections. Select the PTZ device in the Camera Setup screen (see Camera Setup Screen on page 50).

Configuring Recording Settings

Note When the DVR is recording video, the RECORD LED on the front

panel lights up and displays on each camera screen.

Document 800-00919 Rev F

61

02/08