Installation
FigureCaution When using the Factory Reset, you lose any setting you have made. If you want to use the same DVR name registered on the DVRNS server after initializing the system using the factory reset, you need to contact the DVRNS server manager. Please record and save the help desk information before factory reset.
To reset the unit, you need a straightened paperclip.
25.Turn off the DVR.
26.Turn on the DVR again.
27.While the DVR is initializing, poke the straightened paperclip into the unlabeled hole to the right of the
28.Hold the switch until all the LEDs on the Front Panel are lit.
Note When the DVR successfully resets to factory defaults, all the
LEDs on the Front Panel flash three times.
29.Release the reset switch. All of the settings are now at the original settings it had when the DVR left the factory.
Connecting the USB PortA USB port on the front panel is provided to connect external hard disk drives,
Document | 29 |
02/08 |
|