Honeywell K9696V2 2.2Temperature, Field Work, Table, Panel connectors, Connector Label, delivery

	Field Work
Table 3
Panel connectors
Connector Label	Description
SERIAL PORTS	General-purpose serial ports, DB9 connector.
VIDEO INPUTS – IN	BNC connectors for video signal cable from the cameras in a
	CCTV system. A Multi-Media unit has 16 video input
	connections.
VIDEO INPUTS – OUT	BNC connectors to relay a video feed to either a CCTV, NTSC
	or PAL monitor, VCR, or other device. The outs are capped for
	delivery.
MONITOR OUTPUT 1	BNC connector; can be set to produce test pattern or a
	camera tour. Also called “Video spot out” on previous version
	of unit.
MONITOR OUTPUT 2	BNC connector; inoperative for this release.
MOUSE	For standard mouse (supplied)
KEYBOARD	For keyboard (optional)
TELCO	RJ-11 connector to Multi-Media unit’s modem
USB PORT	Inoperative.
PARALLEL PORT	Inoperative.
LAN	RJ-45 connector to unit’s 10/100 BT network card
AUDIO IN/OUT	Soundcard connectors
MIC IN	DISABLED; use AUDIO IN.
ALARM INPUTS	Screw terminal connectors for input and ground*
	connections, to interface with devices such as alarms. TTL
	type: minimum high level of +2.4 volts; maximum low level of
	+0.4 volts.
CONTROL OUTPUTS	Screw terminal connectors for output and ground*
	connections, to interface with devices such as: lights, sirens,
	locks, and so on. TTL type. The outputs do not directly drive
	devices; they control relays that do so.

* Control I/O must be referenced to the ground of the Multi-Media unit.

USB port and Printer port

The USB port and Printer port at the back of the REMM unit are for future use.

Do not connect USB devices or a printer to a Multi-Media unit.

2.2Temperature

Honeywell recommends that a unit be operated in a non-condensing environment, in temperatures ranging from 40° F to 104°F (or 5°C to 40°C).

2–3