Honeywell K9696V2 To indicate the time zone of a Multi-Mediaunit, Conflicting time zones

Multi-Media Unit: Installation Instructions

!39 To indicate the time zone of a Multi-Media unit

1.Using View, select a unit whose time zone needs to be set.

2.Start a maintenance session.

3.Click the Time tab. See figure 32.

4.If the zone indicated in the Time Zone box is incorrect, click the arrow in the box. A list of all time zones appears.

5.Scroll the list as needed to find a match for the time zone in which the unit is installed. The time zone is set right away; there is no need to reboot the unit.

The time zone is set on a unit-by-unit basis.

Repeat this procedure for all of the units in your system.

Fig. 32. Indicating the correct Time Zone in which a Multi-Media unit has been installed is crucial to avoiding confusion during the operation of your video surveillance system.

Conflicting time zones

A Multi-Media unit’s time zone can be changed without the knowledge of a View operator. It can be done at the unit, using LocalView, or through another Multi-Media database (Multi db). The View operator’s next attempt to access the site is interrupted by a message, shown in figure 33.

3–12