Honeywell K9696V2 1.2.3Other Hardware, 1.2.4Powering-upthe Multi-Mediaunit, Walk-through

Walk-through

1.2.3Other Hardware

Ports for future use

The USB ports, Printer port, VGA2 port, the MIC IN connector and the eight, numbered RS-232ports are for future use. Please do not connect USB devices or a printer to a Multi-Media unit.

For more detail

•section 5: Other Site Hardware. p. 5–1

1.2.4Powering-up the Multi-Media unit

!3 Supplying power to the unit and the cameras

Fig. 3. Consider also plugging in cameras into the uninterruptible power supply used for a unit.

In Europe, a UPS is required to meet EN50130–4 Euro Norm.

Power switch

The power switch is located on the front of the unit, behind the locking grille, to the left of the small blue display screen.

1.2.5Admin and View Software

!4 Locate a personal computer (PC) running Multi software

Figure 4. To install Admin and View software, run the Multi Admin CD-ROM. If Microsoft patches are needed for your Windows system, consult the Operator Software Setup Instructions, part #K5401.

1–3