Honeywell K9696V2 installation instructions Find-it, Knowledge Base

7 Find-it

7.1	Knowledge Base
	!1 Connect cameras (as many as 16) to the Multi-Media unit	1–2
	!2 Connect the Multi-Media unit to a network or telephone line	1–2
	!3 Supplying power to the unit and the cameras	1–3
	!4 Locate a personal computer (PC) running Multi software	1–3
	!5 Start Admin to create a Multi database	1–4
	!6 Log on to a Multi database, or create one using Admin	1–4
	!7 Using Admin, add a site	1–4
	!8 Add information about the connection, and save it	1–5
	!9 To use View	1–5
	!10 Log on to View	1–6
	!11 Test the connection; use View to run a Maintenance session	1–6
	!12 Start a Live session	1–7
	!13 Road map to field work	2–1
	!14 To unpack a unit	2–1
	!15 The power up sequence recommended by Honeywell	2–5
	!16 The power down sequence	2–5
	!17 To enable the locking of a LocalView functions	2–8
	!18 To change a LocalView password	2–9
	!19 To assign an IP address to a unit using LocalView	2–10
	!20 To connect a null-modem cable	2–11
	!21 To setup a terminal program	2–11
	!22 To use the Multi-Media Shell	2–13
	!23 To assign an IP address to the Multi-Media unit	2–13
	!24 To quit the program	2–14
	!25 To return to the Multi-Media Shell after a time out	2–15
	!26 To connect the Multi-Media unit to a telephone line jack	2–15
	!27 To field-test a dial-up connection	2–16
	!28 To field-test a network connection	2–16
	!29 To deal with a damaged Multi-Media unit	2–16
		7–1