Honeywell K9696V2 Field Name, Default Address, Shell command, Multi Shell Reference, Table

Multi-Media Unit: Installation Instructions

Table 8

Default Multi network settings

Field Name	Default Address	Shell command
IP Addr	172.25.2.1	ip=
Subnet Mask	255.255.0.0	netmask=
Gateway	172.25.100.4	gateway=

Multi Shell Reference

While using the shell, what you type is saved as soon as you press the Enter key. To change a setting, type its command, as listed in table 9.

Table 9

Multi-Media Shell commands

Command Result

?Displays a list of commands.

cls	Clears the Terminal screen.
quit or q	Quits the Multi-Media Shell and starts the Multi video unit in its normal
	mode of operation.
show	Displays current LAN and PPP settings.
ip=	IP: LAN settings
gateway=
netmask=
comport=	Port offering a connection to the Multi-Media unit’s modem. Values:
	none, port1, port2, or internal.
baudrate=	Transfer rate from the Multi-Media unit to the modem. Values: 9600,
	19200, 38400, 57600, or 115200.
modem	Modem dialing string commands. Your modem documentation lists
prefix=	acceptable values.
modem init=
modem
dial=
local=	PPP: temporary IP settings for TCP/IP network communications,
host=	established between the local (Multi-Media unit) and the host (PC)
	during a dial-upconnection.
timeout=	Time allotted between alarm callback attempts on dial-up connections.
	Value: from 0 to 999 seconds.
Recover	Restores unit software to previous version. System, configuration, and
	application files are restored from the backup directory. After you enter
	this command, the Multi-Media unit is automatically rebooted.

To start the Multi-Media Shell, see 2.7.2: Using a PC Onsite.

!24 To quit the program

•Quit the Multi-Media Shell by typing “q” and pressing Enter.

2–14