Honeywell K9696V2 Windows, Click Start and point to …, … then click, Hypertrm.exe icon, Parameter

Field Work

Table 6

Commands for launching HyperTerminal

Windows	Click [Start] and point to …	… then click
98	Programs, Accessories, Communications,	Hypertrm.exe icon
	HyperTerminal
NT	Programs, Accessories, HyperTerminal	HyperTerminal
2000	Start, Programs, Accessories, Communications	HyperTerminal
XP:	Start, All Programs, Accessories,	HyperTerminal
XP style	Communications
XP:	Start, Programs, Accessories, Communications	HyperTerminal
classic style

Table 7

Settings for HyperTerminal communications session

Parameter	Value
Bits per second	9600
Data bits	8
Parity	None
Stop bits	1
Flow control	Hardware

!22 To use the Multi-Media Shell

1.While watching the terminal program running on the PC, turn the Multi-Media unit on. For ten seconds, the terminal program displays: “HIT ENTER TO KEEP SHELL RUNNING”.

2.Press Enter within ten seconds. After ten seconds, the Multi-Media unit bypasses the Multi-Media Shell and continues its initialization.

After 10 minutes of inactivity, the Multi-Media Shell times out.

To return to it, turn the Multi-Media unit off, then use procedure 22.

!23 To assign an IP address to the Multi-Media unit

1.Type “ip=” (without the quotation marks) followed by the network address assigned to the Multi-Media unit by your network administrator. Press Enter.

2.If needed, use “gateway=” and “netmask=” Multi-Media Shell commands to set them to values assigned by your network administrator. Press Enter after each command’s data.

2–13