SaaS

Use to configure the Enabler to connect with Avalanche on Demand. This is a Software-as-a-Service version of Ava- lanche. Using either of the SaaS configuration options below assumes the user has registered with Wavelink.

Disable SaaS

No SaaS connection is used.

 

 

Scan Configure

Scan bar codes printed from within the Avalanche Console to configure the Enabler for the SaaS

SaaS

connection.

 

 

Manually Config-

Manually enter the SaaS connection information. Enter the server address on the Connection tab

ure SaaS

and the customer ID in the Company text box.

 

 

Adapters

Note: Review the network settings configuration utilities and the default values before setting All Adapters to Enable in the Adapters applet.

Manage Network

When enabled, the Enabler will control the network settings. This parameter cannot be config-

Settings

ured from the Avalanche Mobility Center Console and is enabled by default.

 

 

Manage Wireless

When enabled, the Enabler will control the wireless settings. This parameter cannot be config-

Settings

ured from the Avalanche Mobility Center Console and is disabled by default. For Summit clients,

 

Manage Wireless Settings should not be checked as configuration packages provide more radio

 

configuration options.

 

 

Current Adapter

Lists all network adapters currently installed on the Thor VM2.

 

 

7 - 12