![](/images/backgrounds/160496/160496-270234x1.png)
To use PEAP/GTC, make sure the following profile options are used.
1.Enter the SSID of the Access Point assigned to this profile
2.Set EAP Type to
3.Set Encryption to WPA TKIP
4.Set Auth Type to Open
To use another encryption type, select WPA CCKM, WPA2 AES or WPA2 CCKM for encryption and complete other entries as detailed in this section.
See
Click the Credentials button.
•No entries except the CA Certificate Filename are necessary for
Enter these items as directed below.
1.Enter the Domain\Username (if the Domain is required), otherwise enter the Username.
2.Enter the password.
3.Leave the CA Certificate File Name blank for now.
4.Click OK then click Commit. Ensure the correct Active Profile is selected on the Main tab.
5.See Windows Certificate Store vs. Certs Path (page
6.Once successfully authenticated, import the CA certificate into the Windows certificate store. Return to the Credentials screen and check the Validate server checkbox.
Note: Some servers may be configured to allow only a single use of the password for PEAP/GTC. In this case, wait for the token to update with a new password before attempting to validate the server. Then enter the new password, check the Validate Server checkbox and proceed with the certificate process below.
8 - 22