Power Up

!

If a USB drive, such as a thumb drive is attached to the Thor VM2, the device attempts to boot from the USB drive and

cannot. Please remove the USB drive and power up the Thor VM2 again.

The Quick Mount Smart Dock has a power switch on the back.

The “On” side of this rocker switch has a raised bump to allow the state of the switch to be determined when the switch may not be easily viewed, for example, after the dock is mounted in a vehicle.

After external power has been connected and the Thor VM2 has been mounted in the dock, press the side of the power switch with the raised bump to pass power from the dock to the Thor VM2.

Next locate the power button on the front of the Thor VM2.

SYS

UPS

SSD

P

Press the power button to turn the Thor VM2 on. When the Windows desktop is displayed or an application begins, the power up sequence is complete.

See Power Controls (see page 3-6)for more information.

2 - 7