Install SIM Card

A SIM card may be required for WWAN.

Equipment Required

The following equipment is user-supplied:

•SIM card for desired carrier

•Torquing tool capable of measuring inch pounds

•#2 Phillips screwdriver bit

Installation Procedure

1. For convenience, the Thor VM2 can be removed from the Quick Mount Smart Dock, though it is not necessary.

2. If the Thor VM2 remains in the dock, disconnect the power cable from the dock.

3. Place the Thor VM2 in Suspend by pressing the Power button.

4. Place the Thor VM2 face down on a stable surface.

5. Using a #2 Phillips bit loosen the M3 screws and then remove the tethered access panel with the SIM label. This panel is on the right hand side when the Thor VM2 is face down with the top away from the user.

6. Locate the SIM card installation slot.

7. Slide the SIM card into the slot.

8.Reattach the access panel, torquing the screws to 4-5 inch pounds.

9.If removed, reinstall the Thor VM2 in the dock.

10. Resume the Thor VM2 from suspend.

4 - 63